Marques
Suspension Kit de Conversion Arrière Hauteur Standard PEDDERS Subaru Outback BP
  • Suspension Kit de Conversion Arrière Hauteur Standard PEDDERS Subaru Outback BP
  • Suspension Kit de Conversion Arrière Hauteur Standard PEDDERS Subaru Outback BP

Suspension Kit de Conversion Arrière Hauteur Standard PEDDERS Subaru Outback BP

803055
374,10 €
TTC
Généralement disponible sous 5 à 7 jours (Sous réserve de disponibilité chez le Fabricant)
Quantité
Disponible sur commande

Description

Pedders Rear Suspension Conversion Kit. Standard Height. Subaru Outback, BP

This kit is used to replace the Original Self-Levelling Suspension.. This kit is a direct bolt in replacement. NO modifications to the vehicle are required. No extra parts are required.

Will my vehicle really be returned to its original Ride height?" Yes, definitely!

The original Self Levelling system has a much weaker spring than would normally be used to carry the weight of the car. In this application, the shock absorber has a hydraulic self levelling function built into it. This function, unlike a normal shock absorber, also carries part of the vehicle weight.
As a consequence, failure of the self levelling function is what causes the vehicle to sit low as it is now solely reliant on the spring to support the weight of the vehicle.

Pedders Suspension overcome this by supplying a matched set of dampers and springs specifically for this purpose. You can buy with full confidence that the vehicle will be the correct height and your troublesome and expensive self levelling dampers consigned to history.

Please note our vehicle height measurements are based on 16 inch wheels. This does not mean it will only fit cars with 16 inch wheels. The kit WILL fit irrespective of wheel size.
Key features

Supplied as a MATCHED SET of pre-assembled suspension components including Pedders gas struts, Pedders coil springs, bump stops, boot kits and strut mounts.
Reduced installation time as the components are supplied pre-assembled and ready for direct fitment.
Individually shock dyno tested as a complete suspension system mated to your existing O.E. hardware for quality assurance & performance.
The Pedders EziFit 803055 will restore the height of your Outback.
Pedders SportsRyder gas struts in the EziFit kit are made from heavy duty twin-tube gas construction technology & heavy duty reinforced double welded mountings for long term durability.
The complete kit is a system designed and valved to work together.
Also an easy & low cost way to convert from coil overs.
All backed by our 2 Year / 40,000km warranty

Vehicle Height Information

Rear: 650mm with 16 inch wheels.
Notes: Heights should be measured as shown in the secondary picture.
Contents of Kit 803055 (Pedders Part Numbers)

122378 x 2 – Rear Shock
2938 x 2 – Rear Spring

16 autres produits dans la même catégorie :