Referencia: BSR49XXZ
Marca: WHITELINE
Barre stabilisatrice arrière 24 mm XX réglable Renforcée MOTORSPORT WHITELINE FORESTER SJ INCL TURBO
Pedders EziFit Rear Conversion Kit. Subaru Forester, SG
This kit is used to replace the Original Self-Levelling Suspension.. This kit is a direct bolt in replacement. NO modifications to the vehicle are required. No extra parts are required.
Will my vehicle really be returned to its original Ride height?" Yes, definitely!
The original Self Levelling system has a much weaker spring than would normally be used to carry the weight of the car. In this application, the shock absorber has a hydraulic self levelling function built into it. This function, unlike a normal shock absorber, also carries part of the vehicle weight.
As a consequence, failure of the self levelling function is what causes the vehicle to sit low as it is now solely reliant on the spring to support the weight of the vehicle.
Pedders Suspension overcome this by supplying a matched set of dampers and springs specifically for this purpose. You can buy with full confidence that the vehicle will be the correct height and your troublesome and expensive self levelling dampers consigned to history.
If you regularly carry heavy loads or tow a heavy trailer, we do another version of this kit with stiffer springs, Pedders part number 803042. If you are unsure which kit is most suitable, please do contact one of our staff who will do their best to help you.
Please note our vehicle height measurements are based on 16 inch wheels. This does not mean it will only fit cars with 16 inch wheels. The kit WILL fit irrespective of wheel size.
Key features
Supplied as a MATCHED SET of pre-assembled suspension components including Pedders gas struts, Pedders coil springs, bump stops, boot kits and strut mounts.
Reduced installation time as the components are supplied pre-assembled and ready for direct fitment.
Individually shock dyno tested as a complete suspension system mated to your existing O.E. hardware for quality assurance & performance.
The Pedders EziFit 803040 will restore the height of your Forester.
Pedders SportsRyder gas struts in the EziFit kit are made from heavy duty twin-tube gas construction technology & heavy duty reinforced double welded mountings for long term durability.
The complete kit is a system designed and valved to work together.
Also an easy & low cost way to convert from coil overs.
All backed by our 2 Year / 40,000km warranty
Vehicle Height Information
Rear: 665mm with 16 inch wheels.
Notes: Heights should be measured as shown in the secondary picture.
Contents of Kit 803040 (Pedders Part Numbers)
808473L - Rear Strut Left
808473R – Rear Strut Right
Referencia: BSR49XXZ
Marca: WHITELINE
Referencia: GSS50-81SS2/73
Marca: TEIN
Referencia: 514019
Marca: PEDDERS
Referencia: KBR18-24
Marca: WHITELINE
Referencia: KSB590Q
Marca: WHITELINE
Referencia: BSF39
Marca: WHITELINE
Referencia: W23480
Marca: WHITELINE
Referencia: KBR18-22
Marca: WHITELINE
Referencia: 803046
Marca: PEDDERS
Referencia: BSF14
Marca: WHITELINE
Referencia: W0405-24G
Marca: WHITELINE
Referencia: W63412
Marca: WHITELINE
Referencia: 20206AJ000 21067GA050
Marca: SUBARU
Referencia: W0404-22G
Marca: WHITELINE
check_circle
check_circle